Ground Support Equipment

Ground Power Units

GPU LUZES II/M SERIES VI
  • designed to power on-board aircraft systems with a.c. and d.c. power
  • built on a chassis adapted for manual rolling and towing with maximum speed up to 25 km/h
  • designed for powering onboard aircraft systems, engine startup and onboard equipment technical condition checks with access to 3x400V/50Hz power source with a nominal load of 125 anywhere in the airport or landing site
  • adapted for air transport

 

Download PDF

Technical data

TECHNICAL DATA FOR A.C.
rated three-phases voltage
3 x 115V/200V, 400Hz, 4 wire, 2 sides
voltage control range
112V ÷ 118V
continuous power
90 kVA with cos Φ 0,8-1 @ 40°C
rated phase current
260A on 1 wire, 1 side
max. current in phase
4 x In on 1 wire for 1 sec
1-phase rated voltage
1 x 115V, 400Hz, 2 wire, 2 sides
rated current 
52A on 1 wire, 2 sides
3-phase voltage
3 x 36V, 400Hz, 3 wire, 1 side
rated current 
25A

TECHNICAL DATA FOR D.C.
rated voltage
28V, 2 sides
voltage control range
26V ÷ 29V
rated current
800A, 2 sides
max. current (for 30 sec / for 4 sec)
1800A/2500A

PARAMETERS
dimensions with vehicle (L x W x H)
2900 mm x 1827 mm x 1628 mm
weight 
3200 kg

GPU LUZES V/D series V

Ground power unit LUZES V/D series V is designed for powering onboard aircraft systems, engine startup, and the onboard equipment technical condition checks. LUZES V/D series V is a mobile device driven by a diesel engine. It is mounted on a standard 15 ft. container frame, with which it can be installed on any truck. It can simultaneously power two aircraft.

CONFIRMATION OF COMPATIBILITY

Download PDF

Technical data

TECHNICAL DATA FOR A.C.
3-phase rated voltage
3x115V/200V, 400Hz, 4 wire, 2 sides
voltage control range
112V ÷ 118V
continuous power
125 kVA with cos Φ 0,8-1 @ 40°C
rated phase current
360A (260A on 1 wire)
max. phase current
400A (290A on 1 wire)
1-phase rated voltage
1 x 115V, 400Hz, 2 wire, 2 sides
rated current 
50A
3-phase rated voltage
3 x 36V, 400Hz, 3 wire, 1 side
rated current 
25A

TECHNICAL DATA FOR D.C.
rated voltage
28V, 2 sides
voltage control range
26V ÷ 29V
rated current
800A
max. current (for 30 sec / for 4 sec)
1800A/2500A

PARAMETERS
dimensions with vehicle (L x W x H)
7700 mm x 2550 mm x 2900 mm
weight with vehicle
12700 kg

GPU LUZES V/N series IV

Ground power unit LUZES V/N series IV is designed for powering onboard aircraft systems, engine start up and the onboard equipment technical condition checks. The source of alternating voltage is a generator 3 x 115 V/400 Hz driven by a  multi-fuel diesel engine. The device is designed to simultaneously power two aircraft.

CONFIRMATION OF COMPATIBILITY

Download PDF

Technical data

TECHNICAL DATA FOR A.C.
rated three-phases voltage
3 x 115 V/200 V, 400 Hz, 4 wires
voltage control range
112 V ÷ 118 V
continuous power
125 kVA with cos 0,8-1 @ 40°C
rated phase current
360 A (260 A for one output)
rated single-phase voltage
1 x 115 V / 400 V, 400 Hz, 2-wires
rated current for 1 x 115 V, 400 Hz
50 A
rated three-phases voltage
3 x 36 V, 400 Hz, 3 wires
rated current for 3 x 36 V, 400 Hz 3 x 36 V, 400 Hz
25 A

TECHNICAL DATA FOR D.C.
rated voltage
2 x 28 V
voltage control range
26 V ÷ 29 V
rated current
800 A
max. current (in 30 secs. / in 4 secs.)
1800 A/2500 A

PARAMETERS
dimensions with tow rod (L x W x H)
7080 mm x 2500 mm x 2550 mm
dimensions without tow rod (L x W x H)
4630 mm x 2500 mm x 2550 mm
weight
4000 kg
outgoing cables length
20 m
adjustable suspension height
+ - 100 mm

GPU LUZES II/M series V

Ground power unit LUZES II/M series V is designed for powering the on-board aircraft systems with a.c. and d.c. power during engine start-up and the on-board equipment technical condition checks at a designated location of airfield or landing ground. LUZES II/M series V is an electrically powered stationary device made up of two containers. It can simultaneously power two aircraft.

Download PDF

Technical data

INPUT PARAMETERS
unit is powered from TN-C or TN-S three-phases mains
3-phases rated voltage
3 x 230 V / 400 V, 50 Hz
max. load current
130 A
power factor
cos Φ 0,98

TECHNICAL DATA FOR A.C.
rated three-phases voltage
3 x 115 V / 200 V, 400 Hz
voltage control range
112 V ÷ 118 V
rated phase current
111 A
max. phase current
260 A
rated single-phase voltage
1 x 115 V, 400 Hz
rated current
45 A
rated three-phases voltage
3 x 36 V, 400 Hz
rated phase current
30 A

TECHNICAL DATA FOR D.C.
rated voltage
2 x 28 V
voltage control range
26 V ÷ 29 V
rated current
500 A
max. current (in 5 seconds / in 1 second)
1000 A/2000 A

PARAMETERS
dimensions A2 container (L x W x H)
2030 mm x 1400 mm x 1290 mm
weight A2 container
1200 kg
dimensions B1 container (L x W x H)
540 mm x 625 mm x 1155 mm
weight B1 container
330 kg
supply cable length
60 m
outgoing cables length
20 m

GROUND POWER UNIT LZE-8
  •  universal power supply
  • designed to power specialized hangar equipment for servicing American-made aircraft that require electricity with a voltage of 120V with a frequency of 60Hz
  • contents two sockets with a load capacity of up to 20A
  • mounted on a transport car
  • design that allows for safe powering of devices operating in EX zones
  • the power supply enables the engines to be started in specialized hangar equipment

Additional equipment:

  • power cord up to 50 m mounted on the drum
  • portable modular switchgear

Download PDF

Technical data

supply voltage
powered from a 3-phase power network type TN-S
phase-to-phase supply voltage
3x400V a.c.
rated frequency
50Hz
rated voltage
120V a.c.
acceptable changes of the rated voltage
-1% ÷ +1%
rated frequency
60Hz
total output current
2x20A at temperature up to 41°C

PARAMETERS
dimensions (L x W x H)
1120 mm x 850 mm x 495 mm
weight
85 kg

GPU LZE-6/M series III

Ground power unit LZE-6/M series III is designed for powering the on-board aircraft systems with d.c. power during engine start-up and the on-board equipment technical condition checks. It is electrically powered and designed for use in a hangar as well as on airfield area.

Download PDF

Technical data

supply voltage
230 V/400 V a.c., 50 Hz
wired power supply
3-phases, 5 wires TN-S power supply
max. current
42 A
rated output voltage
28 V
voltage control range
26 V ÷ 29 V
voltage output options
1 x 28 V; 2 x 28 V
rated current
800 A
max. current (30 secs./ 5 secs.)
1800 A/2500 A
two extra sockets
230 V, 16 A

PARAMETERS
dimensions (L x W x H)
1300 mm x 1110 mm x 1190 mm
weight
590 kg
outgoing cables length
2 x 16,5 m